Your Price Only £45.49
Item is not in stock
Lighthouse elite Focus800 LED Torch with Rechargeable USB Powerbank 800 lumens
Product Code: L/HEFOC800
Pack Of 1
Lead Time 4 days
General
The Lighthouse elite Focus800 LED Torch offers a variety of great features and functions, including a 800 lumen output LED with three operating modes: High, Low, Strobe and a variable dimming function for precise light output control. Focus control allows the light to be adjusted from a tight spot beam to a flood light to suit the job in hand.

Its anodised aluminium body is lightweight and durable. The torch is water and dust proof to IP54, suitable for use in all weather conditions. The torch has an integral tail light charging indicator which glows red when the battery requires charging, blue when under charge and green when fully charged. This tail light can also be switched to the Green mode for use as a night vision light for map reading applications.

A useful powerbank function is also provided allowing the torch to be used to recharge many small electronic devices such as mobile phones and MP3 players (using a suitable manufacturers charging lead). The torch has an impressive run time of up to eight hours from its powerful internal 3.7V 2600mAh Li-ion battery which can be recharged, and used time and time again.

Supplied complete with a USB charging lead and car charger unit.

Powerbank Function

To access the torches powerbank function cycle the tail-cap switch until the green map reading LED is illuminated, then depress the tail-cap switch twice in quick succession. The tail-cap light will flash green indicating the powerbank function is switched on and operating.

1) Plug the USB plug into the charging port of the device to be charged.
2) Plug the USB plug into the USB outlet (A) on the side of the torch.
3) Changing will commence as soon as the USB lead is connected, check the torch is switched off, to ensure the recharge time is kept to a minimum.
4) Once the attached device is fully charged disconnect the charging lead to conserve the remaining battery power stored in the torch.

NOTE: The Focus 800 can be used to recharge any device which has been supplied with a USB charging lead by its manufacturer. Lighthouse cannot be held responsible for any damage or accident caused to any device which is charged using the Focus 800 as a power source. Please note some mobile devices charging leads can contain authentication chips to prevent the use of third party chargers with their products.

Specifications:

Light Source: High-performance LED.
Brightness: 800/240 lumens.
Run Time: 3/8 hours.
Beam Distance: 100m.
Power: Rechargeable 3.7V 2600mAh.
Charge Time: 5 hours.
Water Resistant: IP54.
Dimensions: 154 x 37/31.8mm.
Weight: 157g (exc batteries).
Sorry, the item you are trying to view is not available. Continue Shopping

Specification

ManufacturerLighthouse
BrandLighthouse
FormTorches
Country of OriginChina
Battery TypeRechargeable
TypeHome Leisure & Car Care
Max. Lumen Output800
Battery SuppliedYes

Features

A useful powerbank function is also provided that allows the torch to be used to recharge many small electronic devices such as mobile phones and MP3 players (using a suitable manufacturers charging lead). Supplied with a mains and car charger unit.
Beam Distance: 45m
Charge Time: 5 hours (approx.)
Output: 240/800 lumens
Run Time: 8 hours
Size: 154 x 37/31.8mm
Specifications:
The Lighthouse Elite Focus800 LED Torch has three operating modes of High, Low, Strobe with a variable dimming function for precise light output control. It also has an integral tail light charging indicator that glows Red when the battery requires charging, Blue when under charge and Green when fully charged. The tail light can also be switched to the Green mode for use as a night vision light for map reading applications.
Weight: 157g exc. batteries

Artwork

The type of artwork you supply will depend on the printing process used for that particular product. Please refer to our guide below to enable you to supply the correct artwork.

Vector files: .eps , .pdf, .ai

Suitable for all types of print. The majority of print processes and product types don’t allow for the reproduction of tints of a solid colour, any tinted areas of your artwork will need to be converted to a solid colour.

Raster(pixel) files: .png , .jpg, .tiff

Suitable only for full colour/process/transfer print, cannot be used for screen printing, debossing or engraving.

What if I don't have vector format?

Our designers can convert your logo to vector format. You will need to provide artwork in high resolution format. Please don't resave your artwork using vector file format like .eps this makes no difference.

Possible extra costs

Please note that some products will have a setup cost added to the unit costs shown above. Setup costs vary from £10 - £75 depending on the items and can be per colour.

EMBROIDERY

This is one of the most popular embellishment methods, offering a very accurate reproduction of logo in detail and colour. Garments can be embroidered in different positions, providing a durable and professional finish. Embroidery is also a very cost effective method of branding for low order quantities. New logos may be subject to a one off £25 set up charge and logo application is dependent upon stitch count.

HEAT SEAL TRANSFERS

Using a specialist vinyl, we are able to re create logos and text in the form of a transfer that is applied using a heat press, permanently sealing the design to the garment. This is ideal when branding waterproof clothing to maintain the integrity of the garment and often found on high visibility workwear. With no minimum set up, basic logos can be achieved at a low price per application, even for low order quantities. For higher volume orders and more complex designs, specialist badges are made to produce a more accurate representation of the logo.

SCREEN PRINTING

Perfect for high volume t-shirt printing, often for promotional use. This is an especially useful branding method for large logos or multiple logos both can often be incorporated in one print at a low price per garment. Pricing is based on the number of print colours and setup charge of £25 per colour will be applied for all new designs.

TAX TABBING

Tax tabbing provides a simple way of overcoming the personal tax aspect of staff clothing. Tax tabs can be manufactured and affixed to most garments. This branding method allows garments issued to employees by their employer, free of charge, to avoid the enforcement of tax as the garment is no longer classed as a “fringe benefit” to the employee that can be used outside of the work environment. This is ideal for more expensive executive wear such as suits and the financial benefits can proof vast over time. Visit the HM Revenue website for absolute clarification on the rules and regulations.

Shipping

Delivery times

All delivery times are dependent upon print proof approval The average shipping time for standard packages is 3 working days but we do aim to exceed where possible.

Shipping estimate

The shipping costs are based on the volume and weight of the shipment. If you would like to have an indication of the shipping charges, please feel free to ask for a quote. The costs of shipping will be shown on the quotation.

Express service now available on hundreds of products – many items can be printed and shipped the same day, please contact us for more details.


Customers Also Bought


Similar Products

Copyright © 2020 Heatons Group Ltd. Working securely with:
Powered By ECIHorizon v4.79.0.8 20241111 479.0220