Your Price Only £8.65
Item is not in stock
ForgeFix Drywall Screw Phillips Bugle Head SCT Black Phosp 3.5 x 32mm Bulk 1000
Product Code: FORDWS32BP
Pack Of 1
Lead Time 4 days
General
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. Boxes of 500 and 1,000 come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.

APPLICATION:
Designed for fitting dry linings to studding.

Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion.

The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head.

Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 32mm Bulk 1000
Sorry, the item you are trying to view is not available. Continue Shopping

Specification

ManufacturerForgeFix
BrandForgeFix
size3.5 x 32mm
Country of OriginChina
FinishBlack Phosphate Finish
TypeDrywall Screws
PackBulk Box 1000
ThreadSingle Course Thread
HeadBugle

Features

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 32mm Bulk 1000

Artwork

The type of artwork you supply will depend on the printing process used for that particular product. Please refer to our guide below to enable you to supply the correct artwork.

Vector files: .eps , .pdf, .ai

Suitable for all types of print. The majority of print processes and product types don’t allow for the reproduction of tints of a solid colour, any tinted areas of your artwork will need to be converted to a solid colour.

Raster(pixel) files: .png , .jpg, .tiff

Suitable only for full colour/process/transfer print, cannot be used for screen printing, debossing or engraving.

What if I don't have vector format?

Our designers can convert your logo to vector format. You will need to provide artwork in high resolution format. Please don't resave your artwork using vector file format like .eps this makes no difference.

Possible extra costs

Please note that some products will have a setup cost added to the unit costs shown above. Setup costs vary from £10 - £75 depending on the items and can be per colour.

EMBROIDERY

This is one of the most popular embellishment methods, offering a very accurate reproduction of logo in detail and colour. Garments can be embroidered in different positions, providing a durable and professional finish. Embroidery is also a very cost effective method of branding for low order quantities. New logos may be subject to a one off £25 set up charge and logo application is dependent upon stitch count.

HEAT SEAL TRANSFERS

Using a specialist vinyl, we are able to re create logos and text in the form of a transfer that is applied using a heat press, permanently sealing the design to the garment. This is ideal when branding waterproof clothing to maintain the integrity of the garment and often found on high visibility workwear. With no minimum set up, basic logos can be achieved at a low price per application, even for low order quantities. For higher volume orders and more complex designs, specialist badges are made to produce a more accurate representation of the logo.

SCREEN PRINTING

Perfect for high volume t-shirt printing, often for promotional use. This is an especially useful branding method for large logos or multiple logos both can often be incorporated in one print at a low price per garment. Pricing is based on the number of print colours and setup charge of £25 per colour will be applied for all new designs.

TAX TABBING

Tax tabbing provides a simple way of overcoming the personal tax aspect of staff clothing. Tax tabs can be manufactured and affixed to most garments. This branding method allows garments issued to employees by their employer, free of charge, to avoid the enforcement of tax as the garment is no longer classed as a “fringe benefit” to the employee that can be used outside of the work environment. This is ideal for more expensive executive wear such as suits and the financial benefits can proof vast over time. Visit the HM Revenue website for absolute clarification on the rules and regulations.

Shipping

Delivery times

All delivery times are dependent upon print proof approval The average shipping time for standard packages is 3 working days but we do aim to exceed where possible.

Shipping estimate

The shipping costs are based on the volume and weight of the shipment. If you would like to have an indication of the shipping charges, please feel free to ask for a quote. The costs of shipping will be shown on the quotation.

Express service now available on hundreds of products – many items can be printed and shipped the same day, please contact us for more details.


Customers Also Bought


Similar Products

Copyright © 2020 Heatons Group Ltd. Working securely with:
Powered By ECIHorizon v4.79.0.8 20241111 479.0220